 |
| |
Joosten GS-Panels NEW! |
 |
| |
Grass and Grit panels for a
perfect half-open surface. |
 |
INTRODUCTION
When talking about ecological friendly paving structures, we did not take long to think of manufacturing
half-open paving structures. This thought suits the idea of restoring rainwater as groundwater as rapidly
as possible. This enables you to save on sewers and drains. Furthermore, it's very environment friendly
since the always overworked sewing system is respected in this way.
Joosten GS Pro Panels are manufactured from high-quality polypropylene material.
This synthetic material has got the perfect properties for the application and is 100% recyclable!
Thanks to the unique design, no-one has been able to equalise the panel so far. Because of its double cellwalls, it has a high load-bearing capacity (maximum of 560 tons per m2). The GS Pro also has a unique double panel connection system which fixes both horizontal and vertical expansion, and therefore makes the GS Pro easy and efficient to install.
|
|
 |
 |
 |
 |
 |
 |
 |
Grass applications |
 |
 |
Grit applications |
| Applications |
Advantages |
Advantages of GS Pro |
| Parking lots |
94% Open space |
600 x 800 mm therefore twice as fast to install |
| Access and exit routes |
Lightweight |
35 mm high so less filling |
| Calamity roads |
Environment friendly |
Height expansion fixed |
| Roads around buildings for window cleaners |
Panel connection system which allows quick and efficient laying |
Double wall system for a better growth of the grass and for anchoring of the geotextile |
| Driving on lawns |
High load-bearing capacity |
|
| Roof gardens |
Connectable |
|
| Event sites |
Several colours |
More m2 on a pallet which makes transport and storage cheaper |
| Camping and bungalow parks |
Easy to customize |
|
| Biking paths |
Immediately fit for riding |
Integrated armed structure for interlocking |
| Entrance ways |
May be inserted in existing pavement |
|
| Ground stability panel |
Esthetical |
|
| TECHNICAL SPECIFICATIONS |
 |
| Dimensions |
600 x 800 x 35mm (0,48 m2) |
| Material |
Polypropylene |
| UV-resistant |
Yes |
| Load-bearing capacity |
Max. of 100 tons per m2 unfilled
Max. of 560 tons/m2 filled |
| Panel connection system |
Double panel connection system |
| Recyclable |
Yes |
| Colours |
Green and black (recycling), other colours on demand |
| Packaging |
Europallet, 100 panels (48 m2) |
| Accessories |
Reflecting demarcations caps and ground anchors |
| Description of specifications |
 |
| Supplier: Joosten B&L |
| Joosten GS-panel or equivalent |
| Max. load-bearing capacity filled 560 tons per m2 |
| Max. load-bearing capacity unfilled 100 tons per m2 |
| Manufactured from virgin Polypropylene (green) |
| Manufactured from recycled Polypropylene (black) |
| Dimensions 600 x 800 x 35mm |
| Armed double cell walls, which corresponds to the interlockingprinciple |
| Anchor with Joosten GS ground anchors |
| Joosten cam system with double panel click connection |
| Lay according to the supplier's guidelines |
GUIDELINES FOR INSTALLATION
|
Grass applicationsHow deep the base course should be depends on the intended loads.
Installation starting from below can be guided as follows.
Dig up cunette, place suitable geotextile between the ground layer and
the mixed granular layer. The mixed granular should preferably be a 4/40 mix.
Tamp down well. Place suitable geotextile to separate
the mixed granular and the sand for the trees. Place the sand in an at least 10cm layer. Egalize/shape. Install GS-panels and fill
up with tree soil so that the soil exceeds the panel with 1 cm. Tamp down.
Sow with a suitable grass mixture. |
|
Grit applicationsHow deep the base course should be depends on the intended loads.
Installation starting from below can be guided as follows.
Dig up cunette, place suitable geotextile between ground layer
and mixed granular layer. The mixed granular should preferably be a 4/40
mix. Tamp down well. Place suitable geotextile to separate the mixed
granular and the clean sand. Place the clean sand for the sub-base layer. Compact sand well. Place suitable geotextile
to separate the sub-base layer and the GS-panels. Install GS-panels and fill with
grit 8/16 mm (good angle resistance) so that the grit exceeds the panel with 1 cm. |
|
In all casesIn all cases, one should take the dilatation coefficient
of the GS-panels into consideration.
It is crucial to create extra space when dealing with obstacles such as concrete strips, trees,
poles etc. With every order, Joosten B&L provides guidelines for installation.
The contractor himself remains responsible for how much cunette he digs up,
the thickness of the granular layer, the compactness and the choice of the geotextiles according
to the situation. |
|
From our product database......
SELECT * FROM productdatabase WHERE id > 0 AND (artikelnummer LIKE "%GS%" OR naam LIKE "%GS%" OR groep LIKE "%GS%" OR subgroep LIKE "%GS%" OR code LIKE "%GS%" OR synoniemen LIKE "%GS%") AND (artikelnummer LIKE "%PLATEN%" OR naam LIKE "%PLATEN%" OR groep LIKE "%PLATEN%" OR subgroep LIKE "%PLATEN%" OR code LIKE "%PLATEN%" OR synoniemen LIKE "%PLATEN%") AND (artikelnummer LIKE "%PRO%" OR naam LIKE "%PRO%" OR groep LIKE "%PRO%" OR subgroep LIKE "%PRO%" OR code LIKE "%PRO%" OR synoniemen LIKE "%PRO%") GROUP BY subgroep ORDER BY artikelnummer | | |
